Sump pumps add an extra layer of protection to your home by preventing floods in your basement and crawlspace. Because they tend to stay idle for a long time, it’s always a good idea to test it now and then to ensure it’ll function when necessary. Carter’s Plumbing, your go-to plumber in Bloomfield Hills, MI, goes over the testing methods below.
Fill the Sump Pump
Slowly fill the sump pump with approximately 20 liters of water. It should cause the float switch to lift and activate the pump. Also, check if the water is discharging outside. After the water gets pumped, see if the unit will automatically turn off. If you notice that your sump pump isn’t working properly, get in touch with reputable sump pump companies to get into the root of the problem.
Test the Pump’s Power
Your sump pump has two cords—one is for the pump, and the other is for the float. Unplug them both, and plug in the pump cord only. Doing so will activate the pump, and you should hear the motor working. If it doesn’t operate, get professional sump pump repair in Bloomfield Hills, MI, from Carter’s Plumbing.
Inspect the Check Valve
The check valve keeps water in the pipe from running back into the pump. It should be in good shape at all times to avoid significant wear and tear on the system. Look for signs of damage and clear out any dirt and debris. If you’re unsure how to examine the check valve, our team can do this for you during sump pump maintenance.
Ideally, you should inspect and test the sump pump at least once a year, especially before the storm season comes over. Doing so will let you know if a sump pump replacement is necessary before it’s too late. It’s also worth checking for ice or debris in the discharge line during winter.
Whether you need a sump pump installation or maintenance, the pros at Carter’s Plumbing have got you covered. Get in touch with us today to learn more about our services or to schedule an appointment.
